SFS 2425-1969 《硬金属的内向刀片》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 1395-1-2007 en Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1 General requirements《热喷涂 热喷涂设备的验收检验 一般要求［代替 CEN EN 1395］》.pdf

EN 1395-2-2007 en Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2 Flame spraying including HVOF《热喷涂 热喷涂设备验收标准 第2部分 超音速火焰喷涂(HVOF)除外的火焰喷涂［代替 CEN EN 13.pdf

EN 1395-3-2007 en Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3 Arc spraying《热喷涂 热喷涂设备的验收检验 第3部分 电弧喷涂》.pdf

EN 1395-4-2007 en Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4 Plasma spraying《热喷涂 热喷涂设备的验收检验 第4部分 等离子喷涂［代替 CEN EN 1395］》.pdf

EN 1395-5-2007 en Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5 Plasma spraying in chambers《热喷涂 热喷涂设备的验收检验 第5部分 室内等离子喷涂》.pdf

EN 1395-6-2007 en Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6 Manipulator systems《热喷涂 热喷涂设备的验收检验 第6部分 操作装置［代替 CEN EN 1395］》.pdf

EN 1395-7-2007 en Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7 Powder feed systems《热喷涂 热喷涂设备的验收检验 第7部分 粉末配送系统［代替 CEN EN 1395］》.pdf

EN 13950-2014 en Gypsum board thermal acoustic insulation composite panels - Definitions requirements and test methods《石膏板热流 隔音设备复合面板 定义 要求及测试方法》.pdf

EN 13951-2012 en Liquid pumps - Safety requirements - Agrifoodstuffs equipment Design rules to ensure hygiene in use《液体泵 安全要求 粮食加工设备 保证使用卫生的设计规则》.pdf