SFS 2754-1972 《绝缘塑料包裹的人员定位电缆 MMS》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D878-A-2011 POLYARYLETHERKETONE (PAEK) SELF-EXTINGUISHING (SE) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《自熄型(SE)聚芳醚酮(PAEK)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D879-A-2010 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC+PET) MODIFIED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用聚碳酸酯聚对苯二甲酸乙二醇酯混合物(PC.pdf

FORD WSK-M4D890-A1-2010 POLYAMIDE 12 (PA 12) COPOLYMER AMORPHOUS MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用聚酰胺12共聚物非定形成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D890-A2-2010 POLYAMIDE 6-3-T (PA6-3-T) AMORPHOUS MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用聚酰胺6-3-T（PA6-3-T）非定形成型料 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSK-M4D892-A1-2010 POLYAMIDE 12 (PA12) HEAT STABILIZED 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定20%玻璃纤维增强聚酰胺12(PA12)模塑材料 与福特WSS-M.pdf

FORD WSK-M4D893-A1-2010 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 66 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为66 D的热塑性聚酯-乙醚弹性体(TEEE)成型料 .pdf

FORD WSK-M4D893-A2-2006 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 66 DUROMETER D HARDNESS HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-.pdf

FORD WSK-M4D894-A1-2010 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 10% GLASS FIBER REINFORCED MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FOR.pdf

FORD WSK-M4D894-A2-2010 POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA) 10% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M.pdf