SFS 2870-1973 《住房说明，分析和解释》.pdf

相关资源

GB T 4882-2001 数据的统计处理和解释 正态性检验.pdf

GB T 4882-1985 数据的统计处理和解释 正态性检验.pdf

GB T 4882-2001 数据的统计处理和解释 正态性检验.pdf

GB T 17560-1998 数据的统计处理和解释 中位数的估计.pdf

GB T 3359-2009 数据的统计处理和解释 统计容忍区间的确定.pdf

GB T 10092-2009 数据的统计处理和解释.测试结果的多重比较.pdf

GB T 17560-1998 数据的统计处理和解释 中位数的估计.pdf

GB T 3359-1982 数据的统计处理和解释 统计容许区间的确定.pdf

GB T 3359-2009 数据的统计处理和解释.统计容忍区间的确定.pdf

猜你喜欢

GOST 19050-1980 Square throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的带11后角的正方形多面硬质合金切削刀片 结构及尺寸》.pdf

GOST 19051-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔多面的正方形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19052-1980 Square throw-away (indexable) carbide inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔多面和单侧有切屑槽的正方形硬质合金切削刀片 结构及.pdf

GOST 19053-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes and secondary edges at cutting points Design and dimensions《可转位的带孔和顶端有斜边的正方形多面硬质合金切削刀片 .pdf

GOST 19056-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle Design and dimensions《可转位的80菱形的多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19057-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle and cylindrical holes Design and dimensions《可转位的带孔的80菱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19059-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle with cylindrical holes and chip-breaking flutes on one face only Design and dimensions.pdf

GOST 19061-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 84 included angle and chamfered cutting edges Design and dimensions《可转位的带切削刀的84平行四边形多面的硬质合金切削刀片 结构.pdf

GOST 19062-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 55 included angle and chip-breaking flutes on one face only Design and dimensions《可转位的单侧有切屑槽的55平行四.pdf