SFS 3207-1986 In case of interpretation disputes the Finnish fext applies《焊接 对焊接接头的射线照相检查》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF S80-526-1995 Horology Corrected cycloidal toothing gears Step up or reducting gears 《钟表业 校准式摆线齿轮 增速或减速齿轮》.pdf

NF S80-541-1995 Horology Corrected cycloidal toothing gears Spring-barrel centre gears 《钟表业 校准式摆线齿轮 弹簧锁定装置中心齿轮》.pdf

NF S80-560-1995 Horology Involute toothing gears Vocabulary 《钟表业 渐开线齿轮 词汇》.pdf

NF S80-565-1995 Horology Involute toothing gears Basic racks 《钟表业 渐开线齿轮 基本齿条》.pdf

NF S80-566-1995 Horology Involute toothing gears Normal toothing 《钟表业 渐开线齿轮 公称齿连接》.pdf

NF S80-567-1995 Horology Reducing involute toothing gears Corrected toothing without variation of centre distance 《钟表业 渐开线减速齿轮 无轴距变化的校准齿连接》.pdf

NF S80-568-1995 Horology Reducing involute toothing gears Corrected toothing with variation of centre distance 《钟表业 渐开线减速齿轮 有轴距变化的校准齿连接》.pdf

NF S80-569-1995 Horology Reducing involute toothing gears Toothing corrected by shift to 0 5 module 《钟表业 渐开线减速齿轮 齿连接校准值为 0 5 模数》.pdf

NF S80-701-1995 Horology Hardness of steel parts of the watch 《钟表业 钟表钢件的硬度》.pdf