SFS 3230-1976 《塑料 稀释剂中聚氯乙烯的粘性度测定》.pdf

相关资源

JIS K6876-2-2007 塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(聚氯乙烯)-苯乙烯.pdf

JIS A4714-1995 硬质聚氯乙烯内窗窗框.pdf

JIS A5702-1993 硬质聚氯乙烯波纹板.pdf

QB T 2029-1994 丙烯腈-丁二烯-苯乙烯聚氯乙烯(ABSPVC)片材.pdf

JIS C3316-2000 电气设备用聚氯乙烯绝缘线.pdf

JIS A5705-2005 地板覆盖物 聚氯乙烯.pdf

JB T 7630.3-1998 铅酸蓄电池烧结聚氯乙烯隔板.pdf

JIS K6734-2000 塑料.未增塑的聚氯乙烯板.pdf

JIS K6743-2007 输水用硬质聚氯乙烯管接头.pdf

JIS K6777-2009 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道配件(追補1).pdf

猜你喜欢

FORD WSK-M4D731-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 20% GLASS FIBER REINFORCED MELT FLOW RATE 10 - 18 TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维加强 熔态流动率为10-18的聚丙烯(PP)均聚物 与福.pdf

FORD WSK-M4D732-A1-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MELT FLOW RATE 0 5 - 4 0 TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D732-A2-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MELT FLOW RATE 10 - 18 TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D737-A2-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED 30% GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用30%玻璃纤维增强的聚对苯二甲酸丁.pdf

FORD WSK-M4D737-A3-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D7.pdf

FORD WSK-M4D739-A-2006 POLYAMIDE (PA) 12 RIGID HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《刚性、受热稳定的聚酰胺12模塑和挤塑成型料 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSK-M4D739-A2-2006 POLYAMIDE (PA) 12 RIGID HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《刚性、受热稳定的聚酰胺12成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D739-A3-2006 POLYAMIDE 12 (PA12) RIGID HEAT STABILIZED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用聚酰胺12（PA12）刚性、受热稳定的成型料 与标准FORD WSS-M99P1111.pdf

FORD WSK-M4D739-A4-2006 POLYAMIDE 12 (PA12) RIGID HIGH HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酰胺12（PA12）刚性、受热稳定的成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf