SFS 3628-1976 《油漆和清漆 取样》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 10228-2-1998 Non-Destructive Testing of Steel Forgings - Part 2 Penetrant Testing《钢锻件的无损检验 第2部分 渗透检验》.pdf

EN 10228-2-2016 en Non-destructive testing of steel forgings - Part 2 Penetrant testing《钢锻件的无损检验-第2部分 渗透试验》.pdf

EN 10228-3-1998 Non-Destructive Testing of Steel Forgings - Part 3 Ultrasonic Testing of Ferritic or Martensitic Steel Forgings《钢锻件无损检验 第3部分 铁素体或马氏体钢锻件超声检验》.pdf

EN 10228-3-2016 en Non-destructive testing of steel forgings - Part 3 Ultrasonic testing of ferritic or martensitic steel forgings《钢锻件的无损检验-第3部分 铁素体或马氏体钢锻件的超声波检验》.pdf

EN 10228-4-2016 en Non-destructive testing of steel forgings - Part 4 Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings《钢锻件的无损检验-第4部分 奥氏体和奥氏体铁素体不锈钢锻.pdf

EN 10229-1998 en Evaluation of Resistance of Steel Products to Hydrogen Induced Cracking (HIC)《钢产品耐氢诱发断裂(HIC)的评估》.pdf

EN 1023-1-1996 en Office Furniture - Screens Part 1 Dimensions《办公室家具 隔板 第1部分 尺寸》.pdf

EN 1023-2-2000 en Office Furniture - Screens - Parts 2 Mechanical Safety Requirements《办公室家具 隔离屏障 第2部分 机械安全要求》.pdf

EN 1023-3-2000 en Office Furniture - Screens - Part 3 Test Methods《办公室家具 隔板 第3部分 试验方法》.pdf