SFS 3653-1976 《交通头盔 要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 5352F-2009 Steel Corrosion-Resistant Investment Castings 17Cr - 0 55Mo (0 95 - 1 20C) Annealed (UNS J91639)《17Cr 0 55Mo (0 95-1 20C)淬火耐腐蚀钢熔模铸件》.pdf

SAE AMS 5353E-2014 Steel Corrosion-Resistant Investment Castings 16Cr - 1 8Ni - 0 08N As Cast (UNS J91651)《铸造的耐腐蚀钢熔模铸件16Cr - 1 8Ni - 0 08N》.pdf

SAE AMS 5354F-2012 Steel Corrosion and Heat Resistant Investment Castings 13Cr - 2 0Ni - 3 0W Hardened and Tempered to 32 C 38 HRC (UNS J91631)《硬化和回火洛氏硬度(HRC)32-38的熔模铸件13Cr 2 0Ni 3.pdf

SAE AMS 5355J-2009 Steel Corrosion Resistant Investment Castings 16Cr - 4 1Ni - 0 28Cb - 3 2Cu Homogenization and Solution Heat Treated or Homogenization Solution and Precipitation.pdf

SAE AMS 5356D-2016 Steel Corrosion Resistant Investment Castings 15Cr - 4 6Ni - 0 22Cb - 2 8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (U.pdf

SAE AMS 5357D-2017 Steel Corrosion-Resistant Investment Castings 15Cr - 4 6Ni - 0 22Cb - 2 8Cu Solution Heat Treated Precipitation Hardenable (UNS J92110).pdf

SAE AMS 5360F-2004 Steel Corrosion and Heat-Resistant Investment Castings 17Cr - 13Ni - 1 9Mo Solution Heat Treated (UNS J92951)《溶解热处理的17Cr 13Ni 1 9Mo耐腐蚀和耐热钢制熔模铸件》.pdf

SAE AMS 5361F-2013 Steel Castings Sand and Centrifugal Corrosion and Heat-Resistant 18 5Cr - 13 5Ni - 2 1Mo Solution Heat Treated (UNS J93072)《溶解热处理的18 5Cr - 13 5Ni - 2 1Mo耐腐蚀和耐热性砂.pdf

SAE AMS 5362L-2009 Steel Corrosion and Heat Resistant Investment Castings 19Cr - 12Ni - 1 0Cb (Nb) Solution Heat Treated (UNS J92811)《钢熔模铸件19Cr 12Ni 1 0Cb (Nb)溶解热处理的耐腐蚀和耐热性》.pdf