SFS 3738-1976 《插铝制接头的底座》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7434-2008(2014) 0825 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads《测定托盘化或.pdf

ASTM D7435-2008 374 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers《测定已装货集装箱中被动式无线射频识别(RFID).pdf

ASTM D7435-2008(2014) 2921 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers《测定荷载容器上无源射频识别 (RF.pdf

ASTM D7436-2011 8750 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodolo.pdf

ASTM D7436-2012 1875 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodolo.pdf

ASTM D7436-2017 red 0000 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Metho.pdf

ASTM D7437-2008 952 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants《发动机冷却剂的温度和硬水中稳定性的标准试验方法》.pdf

ASTM D7437-2008(2013) 3750 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants《发动机冷却剂的温度和硬水中稳定性的标准试验方法》.pdf

ASTM D7438-2008 895 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters《手持式水分仪应用和现场校准的标准实施规程》.pdf