SFS 757-1980 《奥氏体不锈钢757 X4CrNiMo17 12 3》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 7832-1987 Filier metals for arc welding of creep- resisting steels Classification designation technical conditions of delivery marking of conformity《抗蠕变的电弧焊过滤器金属 分类，指定，交付技术.pdf

ONORM M 7835 Teil 1-1983 Welding destructive tests of welded joints tensile fest on butt welded test samples《焊接 焊接接头的破坏性试验 对接测试样本的拉伸测试》.pdf

ONORM M 7835 Teil 2-1983 Welding destructive tests of welded joints bending test on butt welded test samples《焊接 焊接接头的破坏性试验 对接测试样本的弯曲测试》.pdf

ONORM M 7840-1983 Brazing and soldering terms deflnitions joints《钎焊和锡焊 术语，定义，接头》.pdf

ONORM M 7841-1983 Classification of defects in metallic brazed and high temperature-brazed joints deflnitions descriptions《金属钎焊和高温钎焊接头的缺陷分类 定义，说明》.pdf

ONORM M 7842-1986 Brazed and high temperature brazed joints ofmetallic components《金属组件的高温钎焊和钎焊接》.pdf

ONORM M 7845-1989 Guidelines for welded joints on boilers pressure vessels and pressure-pipelines of unalloyed and alloyed steels《非合金和合金钢锅炉，压力容器和压力管道的焊接接头准则》.pdf

ONORM M 7850-1987 Safety devices against flashback backflow and afterflow for gas welding equipment requirements tests marking of conformity repeated Operation tests《气体焊接设备的防回烧,回流和.pdf

ONORM M 7855-1990 Thermal cutting terms and definitions determination of the quality of cut surface《热切割 术语及解释 切割表面质量的测定》.pdf