SFS 8338-1986 In case of interpretation disputes the Finnish text applies《造船 船舱家具 壁橱》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA AN106001 THRU AN106100 REV 3 VALID NOTICE 1-1994 BOLT-CRES HEX HEAD DRILLED SHANK 500-20《螺栓 耐腐蚀钢六角头 钻孔螺杆 500-20》.pdf

DLA AN106001 THRU AN106100 REV 3 VALID NOTICE 2-2008 Bolt - Cres Hex Head Drilled Shank 500-20《螺栓 耐腐蚀钢六角头 钻孔螺杆 500-20》.pdf

DLA AN106001 THRU AN106100 REV 3-1986 BOLT-CRES HEX HEAD DRILLED SHANK 500-20.pdf

DLA AN106101 THRU AN106200 REV 3 (1)-2003 BOLT-CRES HEX HEAD DRILLED SHANK 5625-18《螺栓 耐蚀钢六角头 钻孔螺杆 5625-18》.pdf

DLA AN106101 THRU AN106200 REV 3 VALID NOTICE 1-1994 BOLT-CRES HEX HEAD DRILLED SHANK 5625-18《螺栓 耐腐蚀钢六角头 钻孔螺杆 5625-18》.pdf

DLA AN106101 THRU AN106200 REV 3 VALID NOTICE 2-2008 Bolt - Cres Hex Head Drilled Shank 5625-18《螺栓 耐腐蚀钢六角头 钻孔螺杆 5625-18》.pdf

DLA AN106101 THRU AN106200 REV 3-1986 BOLT-CRES HEX HEAD DRILLED SHANK 5625-18《螺栓 耐蚀钢六角头 钻孔螺杆 5625-18》.pdf

DLA AN106201 THRU AN106300 REV 3 VALID NOTICE 1-1994 BOLT-CRES HEX HEAD DRILLED SHANK 625-18《螺栓 耐腐蚀钢六角头 钻孔螺杆 2625-18》.pdf

DLA AN106201 THRU AN106300 REV 3 VALID NOTICE 2-2008 Bolt - Cres Hex Head Drilled Shank 625-18《螺栓 耐腐蚀钢六角头 钻孔螺杆 625-18》.pdf