SFS 8974-1986 In case of interpretation disputes the Finnish text applies《造船 通风系统 圆风道 预绝热内部连接》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M11P64-A3-2016 PERFORMANCE ADHESIVE HEAT CURING NON EXPANDABLE EPOXY GLASS FIBER LAMINATE METAL REINFORCEMENT BODY SHOP APPLIED TO BE USED WITH FORD WSS-M99P1111-A (Show.pdf

FORD WSS-M11P64-A3-2017 PERFORMANCE ADHESIVE HEAT CURING NON EXPANDABLE EPOXY GLASS FIBER LAMINATE METAL REINFORCEMENT BODY SHOP APPLIED TO BE USED WITH FORD WSS-M99P1111-A (Show.pdf

FORD WSS-M11P65-A-2008 TAPE PERFORMANCE PRESSURE SENSITIVE ADHESIVE TWO SIDED INTERIOR AND EXTERIOR EMBLEM AND BADGES TO BE USED WITH FORD WSS-M99P111-A 《室内和室外用徽章式压敏胶带的性能(与FORD W.pdf

FORD WSS-M11P65-A2-2008 TAPE PERFORMANCE PRESSURE SENSITIVE ADHESIVE TWO SIDED EXTERIOR BODY SIDE MOLDING TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部的车身侧边模压用双面压敏粘合胶带的性能 与标准FORD WS.pdf

FORD WSS-M11P66-A1-2015 ADHESIVE PERFORMANCE REQUIREMENTS FOR STRUCTURAL BONDING OF FIXED GLASS MOUNTED BRACKETS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M11P66-A1-2018 ADHESIVE PERFORMANCE REQUIREMENTS FOR STRUCTURAL BONDING OF FIXED GLASS MOUNTED BRACKETS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M11P67-A1-2016 PERFORMANCE DIRECT GLAZING ADHESIVE ONE COMPONENT POLYURETHANE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M12A4-A2-2005 LUBRICANT SOLID FILM HIGH TEMPERATURE ANTISEIZE (NICKEL FREE) TO BE USED WITH FORD WSS-M99P1111-A 《耐高温防卡塞（无镍）固态膜润滑剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M12G91-A-2003 SLEEVE HIGH TEMPERATURE ABRASION RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐磨耐高温套管 与标准FORD WSS-M99P1111-A一起使用 》.pdf