SFS B 5 156-1954 Nelikulmaisetaluslaatat《四边形底座》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 267-26-2005 Fasteners - Technical specifications - Part 26 Conical spring washers for bolted connections《紧固件 技术规范 第26部分 螺栓连接件用锥形弹簧垫圈》.pdf

DIN 267-27-2009 Fasteners - Part 27 Steel screws bolts and studs with adhesive coating Technical specifications《紧固件 第27部分 带粘附层的钢制螺钉 螺栓和螺柱技术规范》.pdf

DIN 267-28-2009 Fasteners - Part 28 Steel screws bolts and studs with locking coating Technical specifications《紧固件 第28部分 带压紧层的钢制螺钉 螺栓和螺柱技术规范》.pdf

DIN 267-29-1993 Fasteners product grades for parts for bolted connections for use at temperatures ranging from -200 C to +700 C《紧固件 在-200℃～+700℃温度范围使用的螺栓连接件的产品等级》.pdf

DIN 267-30-2016 Fasteners - Technical specifications - Part 30 Metric thread rolling screws of property class 10 9《紧固件 技术规范 第30部分 特性等级为10 9的米制滚丝螺钉》.pdf

DIN 267-6-1975 Fasteners and similar parts technical specifications finishes and tolerances for product grade F《紧固件和类似零件 产品等级F的表面粗糙度和公差技术规范》.pdf

DIN 268-1974 Tangential Keys and Tangential Keyways for Alternating Shock Loads《交变冲击负荷用切向键与切向键槽》.pdf

DIN 2695-2002 Diaphragm-weld packings and weld ring seals for flange connections《法兰连接用隔板焊接密封件和焊接环形密封件》.pdf

DIN 2696-1999 Flange connections with lens shaped gasket《带透镜形垫片的法兰连接》.pdf