SFS C 4 44-1963 《工作场所核心 25A 380V 型号 TPk25》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 5515-2002 Semiproducts for rail vehicles - Bars and flat products of unalloyed steels - Selection《铁道车辆半成品 非合金钢的棒材和扁平制品 选择》.pdf

DIN 5517-1-2003 Semiproducts for railway vehicles - Bars profiles and sheet of wrought aluminium alloys - Part 1 Selection《铁路车辆用半成品 可锻铝合金棒材、型材及薄板 第1部分 选择》.pdf

DIN 55181-1983 Machine tools straight sided single acting mechanical presses with nominal forces from 400 kN to 4000 kN sizes《机床 额定功率从400kN到4000kN的机械式单动双柱压力机 尺寸》.pdf

DIN 55184-1985 Machine tools open front mechanical power presses installation zone for tools constructional sizes bedplates bedplate rings bed plugs《机床 前开式机械能压力机 工具安装范围 结构尺寸、底座、底座环.pdf

DIN 55185-1983 Machine tools straight sided high speed mechanical presses with nominal forces from 250 kN to 4000 kN sizes《机床 额定功率从250kN到4000kN的机械式双柱高速压力机 尺寸》.pdf

DIN 55189-1-1988 Machine tools determination of the ratings of presses for sheet metal working under static load mechanical presses《机床 静态负荷下板金加工冲压参数的测定 第1部分 机械冲压机》.pdf

DIN 55189-2-1988 Machine tools determination of the ratings of presses for sheet metal working under static load hydraulic presses《机床 静态负荷下板金加工冲压参数的测定 第2部分 液压机》.pdf

DIN 5520-2002 Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys《铁路车辆半成品 铝和精制铝合金板材和带材的弯曲半径》.pdf

DIN 55200-1989 Machine tools spacing of T-slots dimensions《机床 T型槽距 尺寸》.pdf