SFS Z 1 6-1927 Taulut ja kehykset《面板与结构》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 12789-1989 Eddy currents fault detection PIPES INSPECTION OF NON- FERROMAGNETIC METALLIC MATERIALS General technical requirements《涡流电故障侦查 无铁磁金属材料的管道检查一般技术要求 》.pdf

STAS 12790-1989 Soft soldering alloys VERIFICATION METHODS OF SOLDERABILITY Visual and measuring methods《软焊料合金可焊性核查方法 视觉和测量方法 》.pdf

STAS 12791-1989 Protective equipment Safety belt for constructors and monitors《防护装备 施工人员和检察员安全带 》.pdf

STAS 12792-1989 Sintered metallic carbide indexable insert cutters SIDE AND FACE MILLING SLOTTING CUTTERS Main dimensions《烧结金属碳化物可转为刀片切割工具 方和铣开槽刀具主要尺寸 》.pdf

STAS 12793-1989 CHOCKS WITH AXIAL REGULATION FOR SIDE AND FACE MILLING CUTTEBS Main dimensions 《方和铣刀具轴向控制楔主要尺寸 》.pdf

STAS 12794-1989 OIL FOR CALIBRATIONAND ANTICORROSIVE PROTECTION OF INJECTION PUMPS CP4 oil《校准油和喷射泵防腐保护 CP4油 》.pdf

STAS 12795-1989 Ventilation and airconditioning plants Pressure losses determination of heating and cooling batteries《通风与空调设备 加热和冷却电池压力损失测定 》.pdf

STAS 12796-1990 Protection against corrosion STEEL PIECES SURFACE PREPARATION FOR PAINTING《防抗腐蚀 油漆钢片表面 》.pdf

STAS 12797 1-1990 Steels workingability Determination method by drilling with speed drills《钢加工能力 通过高速钻钻孔的测定方法 》.pdf