SIS 14 19 73-1969 Free cutting steel《易切削钢》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF L21-263-1982 Sl type compound rivet with 30 ncd 16 steel shank Cylindrical pan head T 20 type 《 SL 型带30 NCD 16钢制杆的T20型圆盘头复合铆钉》.pdf

NF L21-264-1982 Sl type compound rivet with 30 ncd 16 steel shank 100 degrees countersunk head T 20 type 《 SL 型带30 NCD 16钢制杆的 T20型100沉头复合铆钉》.pdf

NF L21-265-1982 Sl type compound rivet with 30 ncd 16 steel shank Cylindrical pan head T 30 type 《 SL 型带30 NCD 16钢制杆的 T30型圆盘头复合铆钉》.pdf

NF L21-266-1982 Sl type compound rivet with 30 ncd 16 steel shank 100 degrees countersunk head T 30 type 《 SL 型带30 NCD 16钢制杆的T30型100沉头复合铆钉》.pdf

NF L21-270-1981 Sl type compound rivet with T-A6V titanium alloys Technical specification 《 SL 型带T-A6V钛合金复合铆钉 技术规范》.pdf

NF L21-271-2000 Fasteners - Lockbolts protruding head with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024 《紧固件 紧公差T-A6V钛合金杆和2024铝合金环的凸头锁紧螺栓》.pdf

NF L21-272-2000 Fasteners - Lockbolts 100 o countersunk head with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024 《紧固件 紧公差T-A6V钛合金杆和2024铝合金环的.pdf

NF L21-273-2000 Fasteners - Lockbolts protruding head with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10 《紧固件 紧公差T-A6V钛合金杆和XC10钢环凸头锁紧螺栓》.pdf

NF L21-274-2000 Fasteners - Lockbolts 100 o countersunk head with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10 《紧固件 紧公差T-A6V钛合金杆和XC10钢环100沉头锁紧螺栓》.pdf