SIS 14 42 30-1975 Aluminium alloy castings《压铸铝合金 铝42 30 类型AISi6Cu4》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 2745A-2007 Induction Hardening of Steel Parts《钢部件的感应淬火》.pdf

SAE AMS 2753C-2008 Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath《液体盐浴铁素体硝基渗碳无氰化物浴》.pdf

SAE AMS 2757B-2004 Gaseous Nitrocarburizing《气态硝基碳化》.pdf

SAE AMS 2759 10A-2006 Automated Gaseous Nitriding Controlled by Nitriding Potential《由氮化电位控制自动化气体氮化》.pdf

SAE AMS 2759 11-2005 Stress Relief of Steel Parts《钢部件的压力释放》.pdf

SAE AMS 2759 12A-2007 Gaseous Nitrocarburizing Automatically Controlled by Potentials《电压自动控制的气体渗碳剂》.pdf

SAE AMS 2759 1E-2009 Heat Treatement of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)《最小弹性强度低于220 ksi(1517 MPa)的碳和低合金钢零件的热处理》.pdf

SAE AMS 2759 2F-2010 Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher《最小拉力强度为220 ksi(1517 MPa)及更高的低合金钢部件热处理》.pdf

SAE AMS 2759 3F-2015 Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts.pdf