SIS 14 51 70-1967 Free machining brass《易切削黄铜 类型Cu Zn40 Pb3》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 25 1215-1962 Inside callipers《内部测径规》.pdf

CSN 25 1217-1962 Inside spring callipers《弹簧内卡钳》.pdf

CSN 25 1230-1980 Vernier callipers《游标尺卡钳》.pdf

CSN 25 1233-1980 Vernier callipers with points for external measurements《带外部测量点的游标尺卡钳》.pdf

CSN 25 1235-1985 Vernier callipers with points for internal measurements with circular dial and depth gauge Technical regulations《带内部测量点；圆度盘及深度计的游标尺卡钳 技术规范》.pdf

CSN 25 1238-1980 Vernier callipers with points for internal measurements with depth gauge《带内部测量点及深度计的游标尺卡钳》.pdf

CSN 25 1282-1980 Vernier depth gauges with nose《带前端的游标尺深度计》.pdf

CSN 25 1295-1980 Vernier height gauges《高度游标尺》.pdf

CSN 25 1400-1986 Micrometer callipers for external measurement Types《外部测量之用的测微计卡钳类型》.pdf