SIS 16 00 13 Provningsmetoder《颜料 测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WRS-M4D585-C2-2017 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MOLDING COMPOUND RECYCLED 100% PCR PIR RESIN CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Sho.pdf

FORD WRS-M4D625-A3-2016 POLYESTER MOLDING COMPOUND (PBT+PET) 40% GLASS MINERAL FILLED MOLDED-IN-COLOR INTERIOR 25% PCR RESIN CONTENT 15% RECYCLED MATERIAL BY WEIGHT TO BE USED WIT.pdf

FORD WRS-M4D643-B2-2013 POLYPROPYLENE (PP) 40% MINERAL FILLED INJECTION MOLDING COMPOUND RECYCLED WITH 25% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WRS-M4D643-B3-2013 POLYPROPYLENE (PP) 40% MINERAL FILLED INJECTION MOLDING COMPOUND RECYCLED WITH 50% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WRS-M4D648-B3-2018 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND 100% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D648-B1).pdf

FORD WRS-M4D664-B2-2011 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR XX% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Show.pdf

FORD WRS-M4D670-B2-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND 12% MINERAL FILLED RECYCLED GRADE 25% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A.pdf

FORD WRS-M4D670-B3-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND 12% MINERAL FILLED RECYCLED GRADE 75% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A.pdf

FORD WRS-M4D670-B4-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND 12% MINERAL FILLED RECYCLED GRADE 90% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A.pdf