SIS 18 41 15-1973 Paints Determination of consistency by flow-cup《油漆 流动杯法测定稠度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E66-520-3-1997 Working zones of cutting tools Couple tool-material Part 3 application to turning technology 《切削工具的工作区 耦合工具材料 第3部分 在车削工艺上的应用》.pdf

NF E66-520-4-1997 Working zones of cutting tools Couple tool-material Part 4 couple tool-material metodology procedures in turning 《切削工具的工作范围 耦合工具材料 第4部分 车削耦合工具材料分类研究方法》.pdf

NF E66-520-5-1999 Working zones of cutting tools Couple tool-material Part 5 application to milling technology 《切削工具的工作区 耦合工具材料 第5部分 在铣削技术上的应用》.pdf

NF E66-520-6-1999 Working zones of cutting tools Couple tool-material Part 6 couple tool-material methodology procedures in milling 《切削工具的工作区 耦合工具材料 第6部分 铣削过程中耦合工具材料使用方法》.pdf

NF E66-520-7-2000 Working zones of cutting tools - Couple tool-material - Part 7 application to drilling technology on solid 《切割工具的工作带 双工具材料 第7部分 对实体材料的钻孔技术的应用》.pdf

NF E66-520-8-2000 Working zones of cutting tools - Couple tool-material - Part 8 couple tool-material methodology in drilling on plain 《切割工具的工作带 双工具材料 第8部分 在平面上钻孔的双工具材料方法学》.pdf

NF E66-531-1996 Machine tools Self-holding tapers for tool shanks 《机床 工具柄的自动夹紧锥体》.pdf

NF E66-533-1997 Machine-tools Morse taper shanks Cotter slots with taper keys 《机床 莫氏锥度柄 带锥形键的销槽》.pdf

NF E66-550-8-1998 Tool holders with cylindrical shank Part 8 type Z accessories 《带圆柱柄的工具夹持器 第8部分 Z型工具夹持器 附件》.pdf