SIS 18 41 84-1964 Paints Determination of specular gloss《油漆 镜面光泽度测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 17558-1981 Slide frames General specifications《滑动摆架 通用规范》.pdf

GOST 17559-1982 Forest plantations Terms and definitions《森林的树苗 术语和定义》.pdf

GOST 17561-1984 Magnetic amplifiers Terms and definitions《磁放大器 术语和定义》.pdf

GOST 17562-1972 Measuring instruments for functional diagnostic Terms and definitions《诊断用测量仪器 术语和定义》.pdf

GOST 17563-1980 Buttons for fixing soft tapes in cabling Design and dimensions《电缆敷设中固定软带用钮扣 设计和尺寸》.pdf

GOST 17564-1985 Diamond needles Specifications《金刚石针 规范》.pdf

GOST 17565-1972 Electrical magazines for signal rockets Types and basic characteristics《电气化信号弹夹 型式和基本参数》.pdf

GOST 17567-1981 Gas chromatography Terms and definitions《气相色谱法 术语和定义》.pdf

GOST 17573-1972 Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressere Design and dimensions《对零件孔尺.pdf