SIS 18 41 87-1964 Paints Determination of scratch resistance by pencils《油漆 用铅笔测定抗划伤性能》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 3278-2012 Aerospace series Sleeves tubular protruding head in corrosion resisting steel passivated (0 25 mm wall thickness)《航空航天系列 外壳电镀(壁厚0 25 mm)不锈钢端部凸出管状套筒》.pdf

BS EN 328-2014 Heat exchangers Forced convection unit air coolers for refrigeration Test procedures for establishing the performance《热交换器 确定制冷用的强制对流装置空气冷却器性能的试验程序》.pdf

BS EN 3280-2011 Aerospace series Bearings airframe rolling rigid or self-aligning Technical specification《航空航天系列 飞机机身用刚性或自校轴承 技术规范》.pdf

BS EN 3281-1994 Bearings airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9 Dimensions and loads《机体轴承 钢制的刚性单列球轴承 8号和9号直径系列 尺寸和负荷》.pdf

BS EN 3282-1994 Bearings airframe rolling - Rigid single row ball bearings in steel cadmium plated - Diameter series 8 and 9 Dimensions and loads《机体轴承 钢制的镀镉刚性单列球轴承 8号和9号直径系列 尺寸规格和负.pdf

BS EN 3283-1994 Bearings airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9 Dimensions and loads《机体轴承 耐蚀钢的刚性排列球轴 8号和9号直径系列 尺寸和.pdf

BS EN 3284-1994 Bearings airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 Normal clearance category - Dimensions and loads《机体轴承 钢制的刚性单列球轴承 0号和2号.pdf

BS EN 3285-1994 Bearings airframe rolling - Rigid single row ball bearings in steel cadmium plated - Diameter series 0 and 2 Normal clearance category - Dimensions and loads《机体轴承 钢.pdf

BS EN 3286-1994 Bearings airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 Normal clearance category - Dimensions and loads《机.pdf