SIS 23 63 21-1964 Paper Cores of reels《纸 卷筒芯》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 17659-2004 en Welding Multilingual terms for welded joints with illustrations《焊接 带图解的焊接接头的多语种术语 ISO 17659-2002》.pdf

EN ISO 17660-1-2006 en Welding - Welding of reinforcing steel - Part 1 Load-bearing welded joints《焊接 钢筋焊接 第1部分 承载焊接接头》.pdf

EN ISO 17660-2-2006 en Welding - Welding of reinforcing steel - Part 2 Non load-bearing welded joints《焊接 钢筋焊接 第2部分 非承载焊接接缝》.pdf

EN ISO 17662-2016 en Welding - Calibration verification and validation of equipment used for welding including ancillary activities《焊接的校准 验证和用于焊接设备的验证 包括辅助活动(ISO 17662 2016)》.pdf

EN ISO 17663-2009 en Welding - Quality requirements for heat treatment in connection with welding and allied processes《焊接 与焊接和相关工艺有关的热处理的质量要求导则［代替 CEN CR ISO 17663］》.pdf

EN ISO 17664-2004 en Sterilization of medical devices - Information to be provided by the manufacturer for the processing of resterilizable medical devices《医疗设备的消毒 由生产商提供的可再消毒医疗设备的.pdf

EN ISO 17664-2017 en Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices.pdf

EN ISO 17665-1-2006 en Sterilization of health care products - Moist heat - Part 1 Requirements for the development validation and routine control of a sterilization process for me.pdf

EN ISO 17672-2010 7500 Brazing - Filler metals《钎焊 焊料［代替 CEN PREN 1044 CEN EN 1044］》.pdf