SIS 65 00 09-1949 《测定织物拉伸性能》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2881 F2881M-2018 Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications.pdf

ASTM F2881-2011 Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications《无压雨水管用12至60 in [300.pdf

ASTM F2881-2011(2015) Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications《无压暴雨排水管设施用12至.pdf

ASTM F2882 F2882M-2017 Standard Specification for Screws Alloy Steel Heat Treated 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)《最小拉伸强度170 ksi和1170 MPa(英制和公制)的热处理合.pdf

ASTM F2882-2012 Standard Specification for Screws Alloy Steel Heat Treated 170 ksi Minimum Tensile Strength《最小抗拉强度为170 ksi的热处理合金钢螺丝的标准规范》.pdf

ASTM F2883-2011 Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Ap.pdf

ASTM F2884-2012 Standard Guide for Pre-clinical in vivo Evaluation of Spinal Fusion《临床前体外评价脊柱融合的标准指南》.pdf

ASTM F2885-2011 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications《外科植入物用金属注射成钛 - 6铝 - 4钒成分的标准规范》.pdf

ASTM F2885-2017 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications《外科植入物用金属注射成形用钛-6铝-4钒成分的标准规格》.pdf