SIS 74 13 33 E-1969 Core drilling equipment Core barrels type Z Core lifters《钻芯设备岩芯桶，Z型，岩芯升降装置》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM B647-1984(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage《用维氏硬度仪测定铝合金压痕硬度的试验方法》.pdf

ASTM B647-2010 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage《维氏硬度仪测定铝合金压痕硬度的标准试验方法》.pdf

ASTM B647-2010(2016) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage《用韦氏硬度计测量铝合金的压痕硬度的标准试验方法》.pdf

ASTM B648-1978(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor《用巴氏压痕仪测定铝合金压痕硬度的标准试验方法》.pdf

ASTM B648-2010 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor《巴氏压痕仪测定铝合金压痕硬度的标准试验方法》.pdf

ASTM B648-2010(2015)e1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor《用巴科压痕器硬度计测量铝合金的压痕硬度的标准试验方法》.pdf

ASTM B649-2006 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925 UNS N08031 UNS N08354 and UNS N08926) and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and .pdf

ASTM B649-2006(2011) Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925 UNS N08031 UNS N08354 and UNS N08926) and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Ba.pdf

ASTM B649-2006(2016) Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925 UNS N08031 UNS N08354 and UNS N08926) and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Ba.pdf