SIS 82 20 03-1971 Bath tubs Enamel coat《浴缸 搪瓷涂层》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AIA NAS 9004-1990 Screw Hex Head Offset Cruciform-Ribbed Recess Full Thread Alloy Steel 160 000 psi Tensile (Rev 1).pdf

AIA NAS 9005-1990 Screw Hex Head Offset Cruciform-Ribbed Recess Full Thread Alloy Steel 160 000 psi Tensile (Rev 1).pdf

AIA NAS 9006-1990 Screw Hex Head Offset Cruciform-Ribbed Recess Full Thread Alloy Steel 160 000 psi Tensile (Rev 1).pdf

AIA NAS 901-1982 Telescopes and Collimators for Optical Tooling (Rev 2).pdf

AIA NAS 902-1982 Linear Targets See-Thru Optical Tooling 2 1 4 and 1 1 2 Outside Diameters (Rev 2).pdf

AIA NAS 903-1982 Spherical Mount Adapters - Optical Tooling 2 1 4 and 1 1 2 Diameter Targets (Rev 2).pdf

AIA NAS 904-1982 Base - Optical Tooling Spherical Cup Mount (Rev 1).pdf

AIA NAS 906-1982 Linear Targets Solid Optical Tooling 2 1 4 and 1 1 2 Outside Diameters (Rev 1).pdf

AIA NAS 907-2002 Drills High Speed Steel.0625 Thru 1.000 Revision 13 FSC 5133.pdf