SIS 90 00 02-1950 《对于各种表面处理的名称和符号》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7568-2017 red 8471 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications《室外用聚乙烯基结构级塑料木材的标准规格》.pdf

ASTM D7569 D7569M-2010(2015)e1 8630 Standard Practice for Determination of Gas Content of CoalDirect Desorption Method《采用直接吸附法测定煤中气体含量的标准实践规程》.pdf

ASTM D7569-2010 6250 Standard Practice for Determination of Gas Content of Coal-Direct Desorption Method《测定煤含气量的标准操作规程 直接解析法》.pdf

ASTM D7570-2009 4375 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering《绒头纱线地板覆盖物的尺寸稳定性评价的标准试验方法》.pdf

ASTM D7570-2017 red 3232 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering《评定绒头纱线地板覆盖物尺寸稳定性的标准试验方法》.pdf

ASTM D7571-2010 0625 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame《测定缝制接缝在暴露于热空气和明火后保留的强度的标准规范》.pdf

ASTM D7571-2010(2014)e1 5995 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame《测定缝制接缝在暴露于热空气和明火后保留的强度的标准规格》.pdf

ASTM D7571-2018 6250 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame.pdf

ASTM D7572-2011 7500 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process Releases.pdf