SIS MNC 1110-1973 Mechanical stress and impact strength Meta lic materia s Conversion to SI units《机械应力和冲击强度 金属材料转换为国际单位制》.pdf

相关资源

JIS Z 2201-1998 中文版 金属材料拉伸试验.pdf

JIS Z 2201-1998 英文版 金属材料抗拉试验用试样.pdf

JIS Z 2242-2005 金属材料冲击试验方法.pdf

JIS Z 2254-2008 中文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 2254-2008 英文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分钢的电弧焊及气焊和镍及镍合金的电弧焊.pdf

JIS Z3420-2003 金属材料焊接过程的规范及认可.总则 Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding.pdf

JIS G0564-1999 金属材料.平面应变断裂强度的测定.pdf

JIS H7503-2003 超塑变形金属材料孔穴体积百分率的测量方法.pdf

YB T 5293-2006 金属材料.顶锻试验方法.pdf

猜你喜欢

BS 5667-3-1979 Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials storage equipment fed by a pneumatic handling system《连续式机械装卸设.pdf

BS 5667-5-1979 Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials couplings and hose components used in pneumatic handling《连续式机.pdf

BS 5668-1-2000 Routine analytical cigarette smoking machine - Definitions and standard conditions《常规分析卷烟发烟器 定义与标准条件》.pdf

BS 567-1973 Specification for asbestos-cement flue pipes and fittings light quality《轻型石棉水泥烟道管及配件规范》.pdf

BS 5671-1979 Guide for commissioning operation and maintenance of hydraulic turbines《水轮机交付使用、操作与维修指南》.pdf

BS 5672-1991 Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in-line engines and.pdf

BS 5677-1979 Method (precision) for pressure calibration of one-inch standard condenser microphones by the reciprocity technique《采用互易技术对1英寸标准电容式传声器进行压力校准的精确方法》.pdf

BS 5682-2015 Dimensions of probes and terminal units for medical gas supply systems Requirements《医疗供气系统用探测器和终端装置尺寸 要求》.pdf

BS 5686-1986 Specification for straight-sided splines for cylindrical shafts metric nominal dimensions tolerances and gauging requirements《圆柱轴直边花键规范 米制公称尺寸、公差和测量要求》.pdf