SIS SEN 01 27 51-1968 Symbols for electrical diagrams A erials《电气原理图符号A 系列》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D74-A-2008 POLYETHYLENE HIGH DENSITY INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《高密度聚乙烯注塑成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSG-M4D901-A1 FO.pdf

FORD ESB-M4D75-A-2009 POLYURETHANE FOAM HIGH DENSITY TO BE USED WITH FORD WSS-M99P1111-A 《高密度聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D9-A11-1988 ACRYLIC (PMMA) HIGH IMPACT RESISTANT EXTERIOR - OPTICAL GRADE《汽车外部用光学级高抗冲聚甲基丙烯酸甲酯（PMMA）》.pdf

FORD ESB-M4D9-A2-2007 ACRYLIC MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯酸系树脂成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4G151-A-2014 SEALER POLYURETHANE FOAM - RESIN SATURATED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M4G152-B-2009 SEALER RUBBER BASE - LOW TEMPERATURE HEAT EXPANDING - THUMBABLE TO BE USED WITH FORD WSS-M99P1111-A 《THUMBABLE低温膨胀型橡胶基密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4G161-C-2008 SEALER PVC EXPANDING LOW TEMPERATURE HEAT CURING WELDABLE FLOW WASH RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《可焊接耐溢流水洗低温热固膨胀PVC密封剂(和FORD WSS-M99P1111-.pdf

FORD ESB-M4G177-B2-2009 SEALER VINYL BASED - SELF LEVELING - HEAT CURE - PAINTABLE - PUMPABLE - FOR ELECTROCOATED SUBSTRATES TO BE USED WITH FORD WSS-M99P1111-A 《电涂基底用可印刷、可泵送的热固化.pdf

FORD ESB-M4G188-A-2009 SEALER POLYOLEFIN - HOT MELT - EXTRUDED - NON STAINING (NON-FLOW) TO BE USED WITH FORD WSS-M99P1111-A 《不着色的（非流动）挤压热熔聚烯径密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf