SIS SEN 24 06 65 《隔离设备固定物，主题管I75和I95支架》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M99P1-A-2012 CABLE LOW TENSION - VINYL INSULATED - BOND REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A 《乙烯基绝缘低压电缆的粘合要求 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESB-M99P14-A3-1985 PAD PRINTING FIRST SURFACE PLASTIC OR PAINTED PLASTIC EXTERIOR《汽车外部的第一面塑料或涂漆塑料的移印》.pdf

FORD ESB-M99P14-A4-1985 PAD PRINTING SECOND SURFACE PLASTIC EXTERIOR (Shown on ESB-M99P14-A3)《汽车外部用第二面塑料的移印 列于标准ESB-M99P14-A3上》.pdf

FORD ESB-M99P22-A1-2010 WEATHERING PERFORMANCE MOLDED-IN-COLOR UNPAINTED PLASTIC ELASTOMERIC MATERIALS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用未油漆着色模塑塑料 弹性体材料的耐候性能 与标.pdf

FORD ESB-M99P22-A2-2010 WEATHERING PERFORMANCE MOLDED-IN-COLOR UNPAINTED RIGID PLASTIC ELASTOMERIC MATERIALS INTERIOR TRIM TO BE USED WITH FORD WSS-M99P1111-A 《内饰用着色模塑的未涂漆硬质塑料 弹性.pdf

FORD ESB-M9G12-A-2012 WAX LUBRICANT STICK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M9H1-A-2006 FABRIC WOVEN BACKING FOR VINYL COATING - DRILL TO BE USED WITH FORD WSS-M99P1111-A 《钻用乙烯基涂层的背衬用机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M9H101-A-2000 FABRIC BACKING - NON-WOVEN POLYESTER FIBER URETHANE FOAM《聚酯纤维 氨基甲酸泡沫无纺底布》.pdf

FORD ESB-M9H105-A-1994 FABRIC BACKING - NONWOVEN POLYESTER HEAT SET《热定形聚酯无纺底布》.pdf