SIS SEN 24 06 97-1958 《隔离设备固定物，圆形隔离器螺旋棒IR10》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 8230-2-2008 en Safety requirements for dry-cleaning machines - Part 2 Machines using perchloroethylene《干洗机的安全要求 第2部分 用四氯乙烯的机械［已替换 CEN EN ISO 8230］》.pdf

EN ISO 8230-3-2008 en Safety requirements for dry-cleaning machines - Part 3 Machines using combustible solvents《干洗机的安全要求 第3部分 用易燃溶剂的机械［已替换 CEN EN ISO 8230］》.pdf

EN ISO 8249-2000 en Welding - Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals《焊接 奥氏体和双重铁素体-奥氏体铬镍(Cr-Ni)不锈钢焊接金属中铁.pdf

EN ISO 8251-2011 en Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings《铝和铝合金的阳极化 阳极氧化镀层的耐磨性测量 》.pdf

EN ISO 8253-1-2010 en Acoustics - Audiometric test methods - Part 1 Pure-tone air and bone conduction audiometry《声学 听力测试方法 第1部分 纯音气导和骨导听阈[代替 CEN EN26189]》.pdf

EN ISO 8253-2-2009 en Acoustics - Audiometric test methods - Part 2 Sound field audiometry with pure-tone and narrow-band test signals《声学 听力试验方法 第2部分 纯音和窄带试验信号声场测听方法》.pdf

EN ISO 8253-3-2012 en Acoustics - Audiometric test methods - Part 3 Speech audiometry《声学 听力测试方法 语言听力测定》.pdf

EN ISO 8254-1-2009 en Paper and board - Measurement of specular gloss - Part 1 75 degree gloss with a converging beam TAPPI method《纸与纸板 镜面光泽的测量 第1部分 用会聚光束来测定75光泽度(TAPPI法)》.pdf

EN ISO 8254-2-2003 Paper and board Measurement of specular gloss Part 2 75 degrees gloss with a parallel beam DIN method《纸和纸板 光泽度测量 第2部分 75度平行光束 DIN法ISO 8254-2-2003》.pdf