SIS SEN 43 71 00-1975 Magnetic materials and components Survey of standards International recommendations- validity as Swedish standard《磁材料和元件 标准测量 调查 瑞典标准具有国际建议的有效性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 25304-2010 非血管自扩张金属支架专用要求.pdf

GB T 25305-2010 缝焊机.pdf

GB T 25306-2010 辐射加工用电子加速器工程通用规范.pdf

GB T 25307-2010 高压直流旁路开关.pdf

GB T 25308-2010 高压直流输电系统直流滤波器.pdf

GB T 25309-2010 高压直流转换开关.pdf

GB T 25310-2010 固定式点、凸焊机.pdf

GB T 27-1988 六角头铰制孔用螺栓 A和B级.pdf

GB T 28-1988 六角头螺杆带孔铰制孔用螺栓 A和B级.pdf