SIS SEN 85 30 05-1973 Process control Analogue pneumatic signals《处理控制 模拟气动信号》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SANS 15614-11-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 11 Electron and laser beam welding《金属材料焊接程序的规范及质量控制 焊接.pdf

SANS 15614-12-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 12 Spot seam and projection welding《金属材料焊接程序的规范及质量控制 焊.pdf

SANS 15614-13-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 13 Resistance butt and flash welding《金属材料焊接程序的规范及质量控制 .pdf

SANS 15614-3-2009 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 3 Fusion welding of non-alloyed and low-alloyed cast ir.pdf

SANS 15614-4-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 4 Finishing welding of aluminium castings《金属材料焊接程序规范及质量.pdf

SANS 15614-5-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 5 Arc welding of titanium zirconium and their alloys《金属.pdf

SANS 15614-6-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 6 Arc and gas welding of copper and its alloys《金属材料焊接程序.pdf

SANS 15614-7-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 7 Overlay welding《金属材料焊接程序规范和鉴定 焊接程序试验 第7部分 覆盖焊接》.pdf

SANS 15614-8-2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test Part 8 Welding of tubes to tube-plate joints《金属材料焊接程序规范及质量控制.pdf