SIS SMS 1233-1970 Fittings of stainless steel for piping Pressure and temperature ratings《管道不锈钢配件 压力温度等级》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M32J126-A-2012 ENAMEL ACRYLIC BAKING POLISH RESISTANT HIGH SOLIDS EXTERIOR LOW AND MEDIUM GLOSS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M33J100-A-2012 ENAMEL ACRYLIC HIGH SOLIDS LOW VOC EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部涂有低挥发性丙烯酸搪瓷的高固体 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESB-M33J100-A2-2012 ENAMEL ACRYLIC HIGH SOLIDS LOW VOC EXTERIOR REDUCED VISCOSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M33J100-A)《外部涂有低挥发性低粘稠度丙烯酸搪瓷高固体 与福特.pdf

FORD ESB-M33J3-A1-1996 ENAMEL COMPLIANCE VOC THERMOSET BASECOAT BASECOAT CLEARCOAT WET- ON-WET PROCESS - EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部的底涂层 透明涂层湿碰湿工艺用合规VOC含量的.pdf

FORD ESB-M33J3-A2-1996 ENAMEL COMPLIANCE VOC THERMOSET CLEARCOAT BASECOAT CLEARCOAT WET- ON-WET PROCESS - EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on ESB-M33J3-A1)《汽车外.pdf

FORD ESB-M33J3-A3-1996 ENAMEL COMPLIANCE VOC THERMOSET CLEARCOAT WET-ON WET-WITH ESB- M36J1-A1 and ESB-M36J1- A2 TO BE USED WITH FORD WSS-M99P1111-A (Shown on ESB-M33J3-A1)《符合ESB.pdf

FORD ESB-M33J3-A4-1996 ENAMEL COMPLIANCE VOC THERMOSET BASECOAT BASECOAT CLEARCOAT WET- ON-WET PROCESS REDUCED VISCOSITY - EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on .pdf

FORD ESB-M33J3-A5-1996 ENAMEL COMPLIANCE VOC THERMOSET CLEARCOAT BASECOAT CLEARCOAT WET- ON-WET PROCESS REDUCED VISCOSITY - EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on.pdf

FORD ESB-M33J3-B1-1996 ENAMEL COMPLIANCE VOC THERMOSET CLEARCOAT BASECOAT CLEARCOAT WET- ON-WET PROCESS WITH ESB- M33J3-A1 ETCH RESISTANT - EXTERIOR TO BE USED WITH FORD WSS-M99P1.pdf