SIS SMS 1347-1950 《仪器，汽缸公差最小最大，标准直径超过18至80》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65219-2009 Aerospace - Sealing rings - Dimensions masses《航空航天 密封圈 尺寸规格 质量》.pdf

DIN 65220-2002 Aerospace - Gang channel nut assembly with self-locking nuts with MJ thread nut spacing fixed or optional channel in aluminium Classification 1100 MPa 120 C《航空航天 固定式.pdf

DIN 65221-1989 Aerospace sheets from rubber-cork technical specification《航空航天 橡胶 - 软木制薄板材 技术规范》.pdf

DIN 65227-1992 Aerospace workshop facilities guide bushes for hand milling machines clearance 2 5 mm《航空航天 车间设施 间隙为2 5mm 的手动铣床用导套》.pdf

DIN 65229-2012 Aerospace series - Gaskets sheets - Technical specification Inactive for new design《航空航天 密封垫片 技术规格 不适用于新设计》.pdf

DIN 65230-1988 Aerospace anodic polishing of maraging stainless steels code number 2600《航空航天 马氏体硬化不锈钢阳极抛光 代号2600》.pdf

DIN 65236-1988 Aerospace steel nickel- and cobalt-alloy wire technical specification《航空航天 钢丝 镍和钴合金丝材 技术规范》.pdf

DIN 65237-1996 Aerospace - Spherical plain bearings steel on steel - Technical specification inactive for new design《航空航天 双层钢活塞节轴承 交货技术条件 对新设计无效》.pdf

DIN 65238-2002 Aerospace - Anchor nuts with MJ thread deep counterbore self-locking non-floating corner steel Classification 1100 MPa 235 C《航空航天 自锁非浮动钢制角缘带MJ螺纹深埋头锚定螺母 分类 1100MPa 23.pdf