SIS SMS 1433-1966 Woodworking saws G ng saw blades《木工锯 排锯条》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 17178-1971 Turret lathe adapters with rib and Morse cone hole Design and dimensions《带肋材和莫尔斯锥孔六角车床适配器 设计和尺寸规格》.pdf

GOST 17179-1971 Turret lathe with cylindrical collets Design and dimensions《六角车床用圆柱形夹紧套 结构及尺寸》.pdf

GOST 17180-1971 Turret lathe collets with eccentrically positioned cylindrical hole Design and dimensions《六角车床用带偏心圆柱孔夹紧套 结构及尺寸》.pdf

GOST 17181-1971 Turret lathe collets with inclined cylindrical hole Design and dimensions《带倾斜圆柱孔的六角车床夹簧 设计和尺寸规格》.pdf

GOST 17182-1971 Turret lathe collets with eccentrically positioned hole for double nests Design and dimensions《六角车床用双插座用带偏心圆柱孔夹紧套 结构及尺寸》.pdf

GOST 17183-1971 Turret lathe collets with displaced cylindrical hole for double nests Design and dimensions《六角车床双插座用带错位圆柱孔夹紧套 结构及尺寸》.pdf

GOST 17184-1971 Turret lathe collets with rib and concentrically positioned cylindrical hole Design and dimensions《带肋材和同心圆柱孔六角车床夹簧 设计和尺寸规格》.pdf

GOST 17185-1971 Turret lathe collets with rib and eccentrically positioned cylindrical hole Design and dimensions《带肋材和偏心圆柱孔六角车床夹簧 设计和尺寸规格》.pdf

GOST 17186-1971 Turret lathe collets with rib and inclined hole Design and dimensions《带肋材和斜孔六角车床夹簧 设计和尺寸规格》.pdf