SIS SMS 1438-1949 《中心，带轴承前中心，轴》.pdf

相关资源

GYJ 43-1990 广播电视中心技术用房室内环境要求(温度、湿度、照度).pdf

SIS SMS 1437-1948 《中心，带轴承前中心，中心壳》.pdf

SIS SMS 1439-1948 《中心，带导管前中心》.pdf

IRAM-IAP A 25-7-1962 《阿根廷石油电气设备研究中心要求的对蒸汽生成设备以及水锅炉的标准压力以及温度》.pdf

SIS SMS 1436-1948 《中心，带轴承前中心》.pdf

JIS Z 3703：2004 焊接预热温度层间温度焊后温度测量方法.pdf

GB T 18591-2001 焊接 预热温度、道间温度及预热维持温度的测量指南.pdf

CSN ON 02 7215-1963 《用于高速流的温度计池 用于电阻温度计，电热温度计和玻璃温度计》.pdf

MSZ 15804 5-1980 《漆包线温度检测 温度含量》.pdf

猜你喜欢

NASA-TN-D-8151-1976 Fundamentals of fluid sealing《液体密封原理》.pdf

NASA-TN-D-8206-1976 Review of drag cleanup tests in Langley full-scale tunnel (from 1935 to 1945) applicable to current general aviation airplanes《适用于当前通用航空飞机兰利全面风洞(从1935年至1945年)的阻.pdf

NASA-TN-D-8210-1976 An experimental and analytical investigation of the effect on isolated boattail drag of varying Reynolds number up to 130 000 000《变化的雷诺数130 000 000对独立后尾阻力影响的实验性.pdf

NASA-TN-D-8236-1976 Wind-tunnel investigation of a Fowler flap and spoiler for an advanced general aviation wing《先进通用航空机翼的福勒襟翼和扰流板的风洞研究》.pdf

NASA-TN-D-8242-1976 Aerodynamic characteristics of a vane flow angularity sensor system capable of measuring flightpath accelerations for the Mach number range from 0 40 to 2 54《当马.pdf

NASA-TN-D-8244-1976 Predicting failure of specimens with either surface cracks or corner cracks at holes《表面有裂纹或孔处有角裂的样品预测故障》.pdf

NASA-TN-D-8260-1976 A design approach and selected wind tunnel results at high subsonic speeds for wing-tip mounted winglets《在高亚音速时 安装翼梢的小翼设计方法和选择的风洞结果》.pdf

NASA-TN-D-8283-1976 Landing practices of general aviation pilots in single-engine light airplanes《在单发动机轻型飞机通用航空驾驶仪的着陆实践》.pdf

NASA-TN-D-8351-1976 Noise response of cavities of varying dimensions at subsonic speeds《在亚音速下不同尺寸空腔的噪声响应》.pdf