SIS SMS 1484-1949 《木刨子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESH-M2D346-A-2006 POLYURETHANE FOAM SOUND DEADENING - DIE CUT TO BE USED WITH FORD WSS-M99P1111-A 《冲切隔音聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M2G251-A-2014 ADHESIVE EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESH-M2G271-A-1988 ADHESIVE EPOXY - ONE COMPONENT - POURABLE《可倾倒的单组分环氧树脂胶粘剂》.pdf

FORD ESH-M2G320-A-2015 ADHESIVE EPOXY - ONE PART - ETHYLENE GLYCOL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESH-M2L62-A-2003 COPPER WIRE SOFT OR ANNEALED ROUND - SINGLE HIGH TEMPERATURE MODIFIED POLYESTER AND EPOXY CEMENT INSULATED TO BE USED WITH FORD WSS-M99P1111-A 《单层耐高温改性聚酯和环氧.pdf

FORD ESH-M4A176-A-2003 BRAZING FILLER PASTE TO BE USED WITH FORD WSS-M99P1111-A 《钎焊填料膏 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D160-E-2010 HOSE MEDIUM PRESSURE REFRIGERANT ACID RESISTANT SLEEVE COVERLESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESA-M4D160-C)《无罩的中压制冷耐酸套管软管 与福特WSS-M99.pdf

FORD ESH-M4D166-C-2009 POLYPROPYLENE TALC FILLED - HEAT STABILIZED INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《滑石粉填充、受热稳定的聚丙烯(PP)注塑成型料 与标准FORD WSS-M99P1111-A.pdf

FORD ESH-M4D291-C-2009 POLYURETHANE FOAM RESTRICTED FLOW - FLEXIBLE FORMED IN PLACE - WITH ADHESIVE BACKING TO BE USED WITH FORD WSS-M99P1111-A 《带粘合底衬的限流柔性现场成型聚氨酯泡沫 与标准FORD WSS-.pdf