SIS SMS 1648-1955 《压力表，安全水管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 10110-6-2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 6 Centring tolerances (ISO 10110-6 2015)《光学和光子学 光学元件和系统图形的制备 第6部分 中心公差》.pdf

DIN ISO 10110-8-2012 Optics and photonics - Preparation of drawings for optical elements and systems - Part 8 Surface texture roughness and waviness (ISO 10110-8 2010)《光学及光学仪器 光学元件.pdf

DIN ISO 10110-9-2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 9 Surface treatment and coating (ISO 10110-9 2016)《光学和光子学 光学元件和系统制图准备 第9.pdf

DIN ISO 1012-2000 Photography - Film in sheets and rolls for general use - Dimensions (ISO 1012 1998)《摄影 普通用的胶片和胶卷 尺寸》.pdf

DIN ISO 1021-1983 Aircraft engine nacelle fire extinguisher apertures and doors《航空和航天 发动机舱灭火器孔和门》.pdf

DIN ISO 10223-2006 Textile machinery and accessories - Flat warp knitting machines - Numbering of guide bars (ISO 10223 2005) English version of DIN ISO 10223 2006《纺织机械和附件 平经编机 导纱梳.pdf

DIN ISO 10228-2011 Cross-country skis - Binding mounting area - Requirements for test screws (ISO 10228 2011)《对越野滑雪橇固定安装部位的试验螺钉的要求(ISO 10228-2011)》.pdf

DIN ISO 10230-2016 Cycles - Splined hub and sprocket - Mating dimensions (ISO 10230 1990)《自行车 键槽后轴身和飞轮 配合尺寸(ISO 10230-1990)》.pdf

DIN ISO 10242-1-2012 Tools for pressing - Punch holder shanks - Part 1 Type A (ISO 10242-1 2011)《压力工具 冲头柄 第1部分 A型》.pdf