SIS SMS 1651-1958 《铆钉，直径1-8毫米，一般规定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25428-1982 Fluoroplast-42 Specifications《含氟塑料-42 技术条件》.pdf

GOST 25431-1982 Table of dynamic pressures and stagnation temperatures of air as a function of Mach number and flight altitude《空气阻滞温度和动压力随马赫数和飞行高度而变化的表》.pdf

GOST 25432-1982 Motion-picture film Packing marking transportation and storage《电影片 包装、标志、运输和贮存》.pdf

GOST 25437-1982 Radionuclide sources of heat Terms and definitions《放射性核素热源 术语和定义》.pdf

GOST 25438-1982 Dissolving pulp Intrinsic viscosity determination《化学加工用纸浆 特性粘度测定法》.pdf

GOST 25439-1982 Packing materials Method for determining waterproofness in hydrostatic pressure《包装材料，静力水压条件下渗水性测定法》.pdf

GOST 25441-1990 Glued lining cloths General specifications《衬里用施胶布 一般技术条件》.pdf

GOST 25442-1982 Molibdenum annealed strips for deep drawing Specifications《深拉回火钼带材 技术条件》.pdf

GOST 25443-1982 Metal-cutting machines Product specimens for control of working aceuracy General technical requirements《金属切削机床 检验加工精度用样品 一般技术要求》.pdf