SIS SMS 1696-1959 《刨木机，圆形切割》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF C48-361-5-2008 Alarm systems - Alarm transmission systems and equipment - Part 1-5 requirements for Packet Switched Network PSN 《报警系统 报警传输系统和设备 第1-5部分 包交换网络PSN用要求 n》.pdf

NF C48-386-2008 Equipment for use in audio and video door-entry systems 《音频和视频的进门系统用设备》.pdf

NF C48-438-2002 Alarm systems - Intrusion detection - Events controller-recorder function integrated in central alarm units or telephone alarm transmitters 《报警系统 侵入检测 与中央报警装置或电话报警传.pdf

NF C48-438F1-2003 《关于2002年9月NF C48-438标准的解读手册 》.pdf

NF C51-104-1974 Rotating electrical machines Mouting dimensions 《旋转电机 安装尺寸》.pdf

NF C51-105-1971 Rotating electrical machinery Cylindrical shaft ends with keyways Long type series 《旋转电机 用键连接圆柱轴端 长型系列》.pdf

NF C51-113-2008 Rotating electrical machines - Part 3 specific requirements for synchronous generators driven by steam turbines or combustion gas turbines 《旋转电机 第3部分 用蒸汽涡轮机或燃气涡轮机驱.pdf

NF C51-114-1996 Rotating electrical machines Part 4 methods for determining synchronous machine quantities from tests 《旋转电机 第4部分 根据试验测定同步电机数值的方法》.pdf

NF C51-114-2008 Rotating electrical machines - Part 4 methods for determining synchronous machine quantities from tests 《旋转电机 第4部分 根据试验测定同步机数值的方法》.pdf