SIS SMS 1746-1976 Screw ring gauges Profiles and tolerances ISO inch screw threads《螺纹环规 剖面图和公差 ISO英制螺纹》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN SPEC 4002-102-2011 Properties and their scopes for product data exchange - Part 102 Units and quantities on www DINsml net《产品数据交换的特性及其范围 第102部分 www DINsml net上的单位和数量》.pdf

DIN SPEC 4002-13-2010 Properties and their scopes for product data exchange - Part 13 Assignment of the identifier to ISO TS 29002-5《产品数据交换的属性及其范围 第13部分 ISO TS 29002-5的识别器任务》.pdf

DIN SPEC 4002-8-2010 Properties and their scopes for product data exchange - Part 8 Rules for designing application classes《产品数据交换特性和其范围 第8部分 设计应用级别规则》.pdf

DIN SPEC 40032-2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Type URM connector family《纤维光学互连设备和无源组件 纤维光学连接器接口 URM型连接器系列》.pdf

DIN SPEC 40170-2013 Measurement and judgement of the cavitation noise《气穴现象测量和判断》.pdf

DIN SPEC 4261-6-2011 Determination of the nominal daily load of domestic wastewater during the operation of small wastewater treatment plants according to EN 12566-3 and DIN 4261-1.pdf

DIN SPEC 42673-4-2012 Totally-enclosed fan-cooled three phase asynchronous motors with squirrel-cage - designs IM B3 IM B5 IM B14 with bearings - Maximum envelope dimensions《全封闭风扇冷.pdf

DIN SPEC 42887 (DIN IEC TR 60887)-2010 Glass bulb designation system for lamps (IEC TR 60887 2010)《灯具用玻璃灯泡命名系统(IEC TR 60887-2010)》.pdf

DIN SPEC 42955-2012 Shaft extension run out and of mounting flanges for rotating electrical machinery frame size larger then 315 - Tolerances test《旋转电力机械的耗尽轴伸和安装法兰 外框尺寸大于315 容差试验》.pdf