SIS SMS 1768-1960 《硬金属工具，内置孔钢型号131》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 3678 7A-2010 Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite《7类童式聚四氟乙烯(PTFE)模型或者半成品含有25%的碳纤维和石墨》.pdf

SAE AMS 3678 8A-2010 Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber《含有10%碳纤维的类型8聚四氟乙烯(PTFE)模型或挤压件》.pdf

SAE AMS 3678 9B-2010 Type 9 Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings《9类童式聚四氟乙烯(PTFE)成型品颜料 AS4716和AS5857备份环》.pdf

SAE AMS 3678C-2010 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled Pigmented and Filled《非填充式 染色 与填充成分聚四氟乙烯(PTFE)模制品和挤压制品》.pdf

SAE AMS 3681C-1995 Adhesive Electrically Conductive Silver-Filled Epoxy Resin《导电银填充环氧树脂胶粘剂》.pdf

SAE AMS 3681E-2017 Adhesive Electrically Conductive Silver-Filled Epoxy Resin.pdf

SAE AMS 3683A-1993 Tubing Irradiated Modified Fluoropolymer Plastic Electrical Insulation Flame Resistant Flexible Heat-Shrinkable 2 to 1 Shrink Ratio《2 1收缩率的弯曲、电绝缘耐燃的辐射改良含氟聚合物的热塑管.pdf

SAE AMS 3686A-1991 Adhesive Polyimide Resin Film and Paste High Temperature Resistant 315 Degrees C (599 Degrees F)《315℃(519F)耐高温胶粘剂、聚酰亚胺树脂、薄膜和胶》.pdf

SAE AMS 3688B-1988 Adhesive Foaming Honeycomb Core Splice Structural -55 to +82 (-65 to +180 《-55至+82℃(-65至+180F)结构蜂窝夹层拼接板泡沫胶粘剂》.pdf