SIS SMS 1806-1955 《统计质量控制，错误数据控制“计算控制”，简单实验表格，保证型号A0，5》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E21-506-1975 Clamps for stepped packing blocks 《带台阶垫块的压板》.pdf

NF E22-050-1970 Cylindrical and 1 10 conical shaft ends general 《圆柱的和1 10锥度的锥形轴端 总则》.pdf

NF E22-051-1970 Cylindrical shaft ends long series (normal) 《圆柱形轴端 长系列(标准的)》.pdf

NF E22-052-1970 Cylindrical shaft ends short series 《圆柱形轴端 短系列》.pdf

NF E22-053-1970 Cylindrical shaft ends long and short series transmissible torques 《圆柱形轴端 长和短系列 可传送的扭矩》.pdf

NF E22-054-1985 1 10 conical shaft ends with or without parallel keys and keyways (normal) longs series Dimensions 《带或不带平行键和键槽的1／10锥形轴端 （通用）长系列 尺寸》.pdf

NF E22-055-1985 1 10 conical shaft ends with or without parallel keys and keyways Short series Dimensions 《带或不带平行键和键槽的1／10锥形轴端 短系列 尺寸》.pdf

NF E22-056-1984 Cylindrical and 1 10 conical shaft ends Internal threads Center holes 《园柱轴和1 10 锥度的锥形轴端 内螺纹 中心孔》.pdf

NF E22-071-1986 Fly-wheel Calculation and inspection 《飞轮 计算和检验》.pdf