SIS SMS 1867-1972 Worm wheels Information to be given on drawings《涡轮 制图信息》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 11737-1-2018 en Sterilization of health care products - Microbiological methods - Part 1 Determination of a population of microorganisms on products.pdf

EN ISO 11737-2-2009 en Sterilization of medical devices - Microbiological methods - Part 2 Tests of sterility performed in the definition validation and maintenance of a sterilizat.pdf

EN ISO 11746-2012 en Rice - Determination of biometric characteristics of kernels (Incorporates Amendment A1 2017)《稻米 谷物生物计量规格参数表的测定》.pdf

EN ISO 11747-2012 en Rice - Determination of rice kernel resistance to extrusion after cooking (Incorporates Amendment A1 2018)《米 烹饪后稻米籽粒耐挤制测定》.pdf

EN ISO 11771-2010 en Air quality - Determination of time-averaged mass emissions and emission factors - General approach《空气质量 测定时间平均质量排放量和排放因子 一般方法》.pdf

EN ISO 11782-1-2008 en Corrosion of metals and alloys - Corrosion fatigue testing - Part 1 Cycles to failure testing《金属和合金的腐蚀 腐蚀疲劳测试 第1部分 疲劳测试周期》.pdf

EN ISO 11782-2-2008 en Corrosion of metals and alloys - Corrosion fatigue testing - Part 2 Crack propagation testing using precracked specimens《金属和合金的腐蚀 腐蚀疲劳测试 第2部分 使用破碎试样的裂纹扩展测试》.pdf

EN ISO 11806-1-2011 en Agricultural and forestry machinery - Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers - Part 1 Machines fitte.pdf

EN ISO 11806-2-2011 en Agricultural and forestry machinery - Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers - Part 2 Machines for u.pdf