SIS SMS 1919-1962 《形式和位置放宽介绍》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WB900 APPENDIX E-1996 LOBED EXTERNAL DRIVE SYSTEM FOR THREADED FASTENERS《螺纹紧固件用有瓣外部驱动系统》.pdf

FORD WB900 APPENDIX F-2013 Enhanced hexalobular internal driving feature for bolts and screws.pdf

FORD WB900-1996 GENERAL AND DIMENSIONAL REQUIREMENTS OF PAN HEAD RAISED COUNTERSUNK HEAD AND FLAT COUNTERSUNK HEAD MACHINE SCREWS AND MACHINE SCREW AND TOOTH WASHER ASSEMBLIES《盘头、高.pdf

FORD WB980-2007 PAINT CLEARING SCREWS - PERFORMANCE《无油漆螺钉 性能》.pdf

FORD WC120-2008 BOLT - HEXAGON FLANGE HEAD AND CONICAL WASHER PILOT《导正的六角凸缘头和锥形垫圈螺栓》.pdf

FORD WC121-2008 BOLT - HEXAGON FLANGE HEAD AND CONICAL WASHER PILOT《导正的六角凸缘头和锥形垫圈螺栓》.pdf

FORD WC130-2000 BOLT & WASHER - HEXAGON HEAD NP PILOT《带导正点的六角头螺栓和垫圈》.pdf

FORD WC900-2004 GENERAL SPECIFICATION FOR HEXAGON HEAD SCREW AND CONICAL SPRING WASHER ASSEMBLIES《六角头螺钉和锥形弹簧垫圈组件通用规范》.pdf

FORD WD 203-2013 TAPTITE 2000 THREAD ROLLING SCREW C SELECTIVELY HARDENED HEXAGON FLANGE HEAD CATEGORY 070 020.pdf