SIS SMS 2192-1965 Office machines Pins with barrel and head《办公机器 带筒和端头的销》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 22053-1976 Woodcutting twist drills with centre and undercutters Specifications《木材加工用带中心孔和沉头孔的麻花钻 技术条件》.pdf

GOST 22054-1976 Motor and aviation gasolines Method for the evaluation of chemical stability《汽车、航空用汽油 化学稳定性评定法》.pdf

GOST 22055-1976 Motor gasolines Method for evalution of gasoline ability to vapour lock formation《汽车用汽油 形成汽塞的倾向性评定法》.pdf

GOST 22056-1976 Electrically insulating tubes of fluoroplastic 4D and 4DM Specifications《用4Д及4ДM氟塑料制的电绝缘管 技术条件》.pdf

GOST 22057-1976 Woodcutting twist drills Technical conditions《木材切削用麻花钻 技术条件》.pdf

GOST 22060-1976 Subminiature electron glass-type valves and tubes Basic dimensions《玻璃装帧超小型电真空器件 基本尺寸》.pdf

GOST 22062-1976 Injection mould bases with ejector plate Design and dimensions《压力热塑铸造用带顶出器板压模坯料 结构及尺寸》.pdf

GOST 22063-1976 Injection mould bases with take-off plate Desing and dimensions《压力热塑铸造用带起箱板压模坯料 结构及尺寸》.pdf

GOST 22064-1976 Injection mould bases with take-off and ejector plate Design and dimensions《压力热塑铸造用带起出器板和起箱板压模坯料 结构及尺寸》.pdf