SIS SMS 2237-1968 Gas cylinders Valves General technical requirements《气缸 阀门 通用技术条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESH-M4D292-A2-2009 TUBING POLYVINYL CHLORIDE - VACUUM LINE TO BE USED WITH FORD WSS-M99P1111-A 《真空管路用聚氯乙烯管件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D293-B-2005 POLYPROPYLENE 20% TALC FILLED - HEAT STABILIZED TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的20%滑石粉填充的聚丙烯（PP） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D367-A-2009 NYLON (TYPE 612) 43% GLASS FIBER REINFORCED HEAT STABILIZED - BLACK TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的43%玻璃纤维增强的黑色尼龙（612型） 与标准FORD WSS-M99P1111-A一.pdf

FORD ESH-M4D370-B-2009 POLYTETRAFLUOROETHYLENE 25% GLASS FILLED TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃填充的聚四氟乙烯 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D380-A-2009 POLYURETHANE FOAM LOW DENSITY SKINNED - FOAM IN PLACE TO BE USED WITH FORD WSS-M99P1111-A 《现场发泡有皮式低密度聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D380-B-2009 POLYURETHANE FOAM LOW DENSITY - SKINNED - FOAM IN PLACE - WITH BIOCIDE TO BE USED WITH FORD WSS-M99P1111-A 《含抗微生物剂的现场发泡结皮低密度聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起.pdf

FORD ESH-M4D390-A-2009 POLYURETHANE FOAM SOUND DEADENING - HEAT FORMED TO BE USED WITH FORD WSS-M99P1111-A 《热成型隔音聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D415-A1-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚烯径（TEO）吹塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D415-A2-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚烯径(TEO)弹性体吹塑成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准F.pdf