SIS SMS 2348-1966 Screw threads and threads undercut for shank hooks《直柄吊钩用螺纹和螺纹退刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF C42-330-2008 Industrial platinum resistance thermometers and platinum temperature sensors 《工业铂电阻温度计和铂温度敏感器》.pdf

NF C42-331-1991 Temperature sensors using platinum resistance for temperature measurement related to stator windings Specification setting up and use of temperature sensors mounted.pdf

NF C42-482-2008 Instrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV 《仪表用变压器 Um不超过52KV的三相感应电压变压器》.pdf

NF C42-544-8-2006 Instrument transformers - Part 8 electronic current transducers 《互感器 第8部分 电子电流互感器》.pdf

NF C42-632-2006 Performance characteristics and calibration methods for digital data acquisition systems and relevant software 《数字数据采集系统及相关软件的性能特征和校准方法》.pdf

NF C42-710-1988 Photometers Determination of metrological characteristics classification according to the latter calibration check of the main characteristics liable to vary with t.pdf

NF C42-711-1989 Luminance meters Determination of metrological characteristics classification according to the latter calibration check of the main characteristics liable to vary w.pdf

NF C42-721-2006 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-020 particular requirements for laboratory centrifuges 《测量、控制和实验室用.pdf

NF C42-722-2005 Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-051 particular requirements for laboratory equipment for mixing an.pdf