SIS SMS 2713-1968 Flttings oj grey iron for waste water Single branches 87 5《用于废水的灰铸铁配件 单支管87 5》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7389-2007 Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes《顺丁烯二酸酐(MAH)移植蜡的酸值(经验值)用标准试验方法》.pdf

ASTM D7389-2007(2012) 0625 Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes《马来酸酐 (MAH) 嫁接蜡酸值 (经验上的) 的标准试验方法》.pdf

ASTM D7390-2007 780 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments《通过两种环境之间的比较评估石棉粉表面的标准指南》.pdf

ASTM D7390-2007(2012) 1834 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments《通过两个环境比较对石棉表面灰尘评估的标准指南》.pdf

ASTM D7390-2018 red 3750 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments.pdf

ASTM D7391-2009 516 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy《在惯性冲击样品中用光学显微镜对空气.pdf

ASTM D7391-2017 red 8266 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy《在惯性冲击样品中用光学显.pdf

ASTM D7391-2017e1 3495 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy《用光学显微镜对惯性冲击样品空.pdf

ASTM D7392-2007 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants《PM探测器和袋子检漏.pdf