SIS SMS 2724-1968 Fittings of grey iron jor waste water Short reducers《用于废水的灰铸铁配件 短异径管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 21751-1976 Sealants Determination method of tensile strength ultimate elongation at break and deformation set after break《密封体 规定强度、断裂时相对延伸率、以及断裂后相对残余延伸率测定法》.pdf

GOST 21752-1976 Human being-machine system Control handwheels and steering wheels General ergonomic requirements《人机体系 操作轮和操作柄 工效学的一般要求》.pdf

GOST 21753-1976 Man-machine system Control levers General ergonomic requirements《人机体系 操作用杠杆 工效学的一般要求》.pdf

GOST 21755-1976 Printing teletypes for 5-elements code Fonts Symbols size and his contour《通断式五单元编码印字电报机 字体 字符尺寸及其字型》.pdf

GOST 21756-1976 Printing teletypes for 5-elements code Reliability test methods《5单元编码的通断式印字电报机 可靠性试验方法》.pdf

GOST 21758-1981 Motor vehicle meintenance and repair system Determination of maintainability and repairability characteristics during the tests《汽车技术服务和修理体系 试验时对使用工艺性和修理合格性指标的判断方法》.pdf

GOST 21760-1976 Self-opening threadcutting die heads with circular chasets Tipes and main dimensions《带圆梳形牙板自动张开式板牙头 型式及基本尺寸》.pdf

GOST 21761-1976 Circular chasers for self-opening threadcutting die heads Main dimensions《自动张开式板牙头用圆形板牙 基本尺寸》.pdf

GOST 21762-1976 Cams for self-opening threadcutting die heads Main dimensions《自动张开式板牙头凸轮 基本尺寸》.pdf